I'm extremely confused about this topic as each source gives a different opinion.

Here, for instance, but also in this video, it is said that the barbell must touch the shins. The first source says:

The bar should stay in contact with your shins and thighs the entire way up. This leg contact makes sure the bar path is over the middle of your foot.

But, there exists the same number of sources which say it must not! For instance, here it is written that:

At this point, if we'd were to keep our back nice and tight, and proceed on performing the lift by performing the exercise through leg drive, the bar would ideally move in a vertical line, which means it would NOT touch the shins at any point of the lift, since they would verticalize as we come up through the movement as well.

And this image is provided:

enter image description here

Here a bit distance between the bar and the shins is suggested too, in order to avoid bar hitting knees.

Finally, in this video, from the 8:30 mark, it seems that the bar should touch the shins at the bottom but not on the way up.

Which is the truth and why?

  • 2
    Shin-touching proscriptions are generic; people aren't. There's several reasons the bar can contact the shins / knees / etc during the pull. Shin position discusses shin angle in general. Making the pull vertical is the (a) goal; how it gets there depends on personal body mechanics, positioning, flexibility, body proportions, etc. Commented Aug 26, 2021 at 17:04

3 Answers 3


Like most areas of fitness, it's pretty easy to find conflicting advice. That said, I think most would agree that keeping the bar as close as possible to the legs on the way up allows you to lift more weight, but that actually hitting your shins or knees can hurt, and may also be suboptimal due to introducing friction between the bar and your legs. Keeping the bar close to the legs is optimal, because it maximises the proportion of the load that can be shifted from the hips and lower back to the legs. Whereas lifting with the bar away from the legs very quickly puts the entire load only the hips and back.

In powerlifting, the standard practice (generally required in competition) is to wear long socks in order to avoid drawing blood (and creating a disease transmission risk) during the deadlift. Those who really tend to pull hard into their shins will also often wear strips of athletic tape up the shins, underneath their socks.

Practically, I'd usually advise that people deadlift in tights, pants, or long socks, or if they find that they get too hot with their legs covered, try to start the lift with their shins in contact with the bar, but then aim to maintain only slight contact on the way up. Maintaining light contact with the bar should be achieved by straightening your legs only just fast enough to keep them out of the way of the bar, not by allowing the bar to swing forwards.

As for the individual sources you reference:

  • Everything in the Brentwood Barbell video seems like good advice.
  • The second video you mentioned is missing its link.
  • Pheasyque makes the assumption that when the spine flexes, the hips and knees remain in the same position but the shoulders (and hence the bar) move backwards. This is extremely unlikely. It's not hard to find videos of people letting their spine flex as they begin the deadlift, and pretty much whenever this happens, it's a matter of the knees straightening and hips rising, while the shoulders stay in the same position. So in that case the shins are actually getting further away from the bar.
  • The Women Who Lift Weights video just seems wrong from start to end. Long-legged people don't deadlift with vertical shins and short-legged people don't have a tendency to start with their knees further in front of the bar. When he says this, you can actually see that he pushes the bar forward in order to get his knees forward, which reveals the real cause of having the knees too far forward in the deadlift - starting with the bar too far forward. Then we he demonstrates "getting a little bit back from the bar", he actually pulls the bar back over the mid-foot, closer to his standing shin position.
  • The Athlean-X video actually says that the bar should contact the shins the whole way up. From 12:08: "We want to make sure that it's dragging up those shins every inch of the way. Alright? Staying in contact."
  • amazed u went across eery source
    – Babu
    Commented Oct 4, 2023 at 19:26

In sumo your shoulders need to be above and not in front of the bar like conventional. The bar can be in light contact with the shins to insure a vertical bar path as in not moving away from your body. The problem with 1 inch away from the shins is the barbell can migrate away from you which taxes your lower back. Filmed from the side, the arms look straighter if the bar is 0.5 to an inch away from the shins vs against the shin. It comes down to personal preference and whatever allows a straight bar path.


That image is 100% bs. I think they just thought it would be nice if doing it the "correct" way led to the barbell not touching the shins. The reality is the closer the barbell is to you going up (your shins), the less reaching forward you have to do and the better your form will be. How do they explain trap bars if their idea is the barbell has to be in front of you away from the shins? Stupid.

  • Welcome to the site! I believe your answer is being downvoted because it's more of a conversational type answer. I welcome you to read the help page and the parts on how to ask/answer.
    – JohnP
    Commented Feb 13, 2023 at 14:17

Not the answer you're looking for? Browse other questions tagged or ask your own question.